Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Last revision Both sides next revision
runs [2015/05/27 15:31]
jluopajarvi
runs [2015/05/27 16:03]
jluopajarvi
Line 26: Line 26:
  
 ==== Manually enter laptimes ==== ==== Manually enter laptimes ====
-By default you have only one lap. More laps can be added from the button in the bottom.+By default you have only one lap. More laps can be added from the button in the bottom. Currently you can't delete a lap. Click calculate mistakes button and then uncheck unwanted lap time and clock "​calculate mistakes"​ again. This way you can delete a lap time.
  
 ==== Stopwatch ==== ==== Stopwatch ====
Line 32: Line 32:
  
 ==== Mylaps import ==== ==== Mylaps import ====
-For Mylaps practice import you need to select the Mylaps track ID in the track settings.+For Mylaps practice import you need to select the Mylaps ​Practice ​track in the track settings.
  
 Additionally you need to set car transponder in the car settings. Same transponder number can be used for several cars, but be careful if you are using the same transponder with different cars (especially on the same day) that you will import the correct sessions to TestLogger. Additionally you need to set car transponder in the car settings. Same transponder number can be used for several cars, but be careful if you are using the same transponder with different cars (especially on the same day) that you will import the correct sessions to TestLogger.
  
-When importing laptimes from Mylaps you need to select the Mylaps session first. After selecting the session Testlogger will bring a list of laptimes.+When importing laptimes from Mylaps ​Practice ​you need to select the Mylaps session first. After selecting the session Testlogger will bring a list of laptimes.
  
 Below the laptimes there is an option to merge sessions. For example you have two short sessions in Mylaps and you would like to merge those together in TestLogger. It is done by selecting the second session from the list and will add the new laptimes from second sessions after the laps of first session. Testlogger won't organize the laptimes by the time of the day. Below the laptimes there is an option to merge sessions. For example you have two short sessions in Mylaps and you would like to merge those together in TestLogger. It is done by selecting the second session from the list and will add the new laptimes from second sessions after the laps of first session. Testlogger won't organize the laptimes by the time of the day.
Line 45: Line 45:
  
 ==== MyRCM import ==== ==== MyRCM import ====
-TestLogger will fetch list of MyRCM events based on selected date. Additionally the correct transponder number must defined in car settings.+TestLogger will fetch list of MyRCM events based on selected ​run date. Additionally the correct transponder number must defined in car settings.
  
-After Session is created, all MyRCM heats needs to be saved to TestLogger separately. So create new run as usual. Check that car, track and date are matching ​the session informationIf everything is working properlythen you should see dropdown ​list of your heats in Run data section. Select the run you want to import and then save run as usual.+Before importing you need to set car transponder in the car settings. Same transponder number can be used for several carsbut be careful if you are using the same transponder with different cars (especially on the same day) that you will import the correct sessions to TestLogger. 
 + 
 +After selecting the MyRCM eventTestLogger will show a list of heats were your transponder has been used.
  
 <WRAP center round important 60%> <WRAP center round important 60%>
Line 60: Line 62:
  
 ===== Setup information ===== ===== Setup information =====
-In setup information you can enter the used setupsheet In the same section ​it is possible to enter feelings about the car or driving+In setup information you can select ​the used setup sheet. Setup sheet can be selected from drop-down and it'​s ​possible to edit/make a new revision of the setup with edit button. If you have only one setup change, then quick change can be used. Just select changed parameter from drop-down and change ​the value.
  
-Setup sheet can be selected from dropdown and it's possible to edit/make a new revision of the setup with edit button. ​It is also possible to view the selected setup.+It is also possible to view the selected setup with view button.
  
 ===== Tire information ===== ===== Tire information =====